Doming on Smartphone case

Doming is one of coating and decorating methods and adds 3D effect on to 2D print surface. Special liquid polyurethane resin covers the print surface and creates dome shaped finish by surface tension.

Mix same amount of liquid resin and curing agent.

Since both of liquids have same specific gravity, a digital scale is used.

25g each liquid is mixed together and 50g liquid doming resin is prepared.

Pour the liquid in to a cup and cover it, then attach to a vacuum mixer.

Mix the resin for 6 minutes in a vacuum.

Stop the mixer after 6 minutes and unlock for removing the cup.

Pour the liquid carefully in to the syringe. Place a paper cup under the syringe to prevent leaking.

The resin is ejected by air pressure from a compressor.

Thanks to the high-viscosity of the liquid resin, the resin is applied easily.

Apply a large amount of resin on two places of the smartphone case surface. The dropped resin is spread and stopped at the edge by itself.

Cover the surface with the resin with a small brush or a rubber spatula.

If air bubbles are found, warm the resin to remove them with a gas torch.

Place the case in a dry chamber and keep it horizontally.

After one hour, check the surface of case whether air bubbles are arisen.

Glossy domed surface is very attractive and adds value to printing.

The appearance of the finished product may vary depending on conditions and environment such as room temperature. Please test before starting production.

Content in this website is subject to change without notice.

Supports A3 size & 153 mm height. Desktop type Flatbed UV Inkjet Printer Extra model

Supports A2 size & 153 mm height. Desktop type Flatbed UV-LED Inkjet Printer

Supports A3 size & 153 mm height. Desktop type Flatbed UV-LED Inkjet Printer

Supports 710 510 mm (28 20 in) / 153 mm height. High precision & high image quality & high productivity printing.

Supports A2 size & 150 mm height to provide higher image quality than ever before

Reaching a higher level, Innovative progression. Printable on 150mm high materials with 6-color + white inks.

Now with Inkjet Primer capability and new UV curable ink offerings will open a host of new possibilities and applications

2182-3 Shigeno-Otsu, Tomi-city, Nagano, Japan

We use cookies in order to offer you a better experience in our website. By your continuation of browsing, we will regard that you have agreed to the use of cookies.